10Pcs CAT40 75° 0.747" Pull Stud Coolant Thru Retention Knob For Mori Doosan

Description

Description：
Head Diameter：0.747" Head Angle ： 75° Drawbar Thread Size：5/8"-11 Machine Taper Size ：CAT40 Neck Diameter：0.549" Hole：0.281" Pilot：0.641" Overall Length：2.001" Shoulder To Head：0.787" Shoulder To End：1.024" Coolant Hole
Features：
Made from alloy steel 5155 with heat treat to RC 56-58
Each retention knob is individually magnetic particle tested to ensure free of crack
High quality black oxide finish to ensure long enduring tool life
10Pcs CAT40 75° 0.747" Pull Stud Coolant Thru Retention Knob For Mori Doosan
Description：
Head Diameter：0.747"
Head Angle ：
75°
Drawbar Thread Size：5/8"-11
Machine Taper Size ：CAT40
Neck Diameter：0.549"
Hole：0.281"
Pilot：0.641"
Overall Length：2.001"
Shoulder To Head：0.787"
Shoulder To End：1.024"
Coolant Hole
Features：
Made from alloy steel 5155 with heat treat to RC 56-58
Each retention knob is individually magnetic particle tested to ensure free of crack
High quality black oxide finish to ensure long enduring tool life
Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob
This pull stud is compatible with the following:
J&M JM71123
TJ Davies PSC-470 X 15
Lyndex C40-1500-ISO
Collis 69004
Command RS4E-0114-C
Quantity：
10 pcs
CAT 40
75°
.747 Pull Stud for DMG Mori Doosan
Payment
We accept Paypal only.
Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location. If you require another company, please contact us.
Returns
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
Greennnmood
Hand Tools
Control Module
Shop Category
Store Home
CNC
◈  Edge finder
◈  Drill Bits
◈  Spring Collet
◈  Boring Bar
◈  Mandrel
◈  Collet Chuck
◈  Blade
◈  Pull Stud
◈  Quick Change Tool Post
◈  Drill Chuck
◈  Drill Chuck Arbors
◈  live center
◈  vise
◈  Milling Arbor
◈  Reamer
◈  Blocks
◈  other
Hand Tools
◈  Rivet Gun
◈  Wrenches
◈  Hydraulic Crimper
◈  Balance Level
◈  Drill Bits
◈  Outside Micrometer
◈  Casters
◈  Steel Tape Measure
◈  Other
Metalworking Supplies
◈  Sanding Disc
◈  Metal Cut Off Wheels
◈  Flap Discs
◈  Hose Clamp
◈  Welding Wire
◈  Cable
◈  Piston Driver
◈  Other
Generator Accessories
◈  Automatic Voltage Regulator
◈  Generator Carburetor
◈  Other
Industrial Control Module
◈  PLC
◈  Control Valves
◈  Roller Chain
◈  Other
Other
Hot Item
4" Earth Auger Drill Bits for Gas Powered Post Fence Hole Digger
USD 22.40
AVR SX460 Automatic Voltage Volt Regulator Replacement for Generator
USD 19.10
4" 6" 8" 10" 12" Earth Auger Drill Bits for Gas Powered Post Fence Hole Digger
USD 22.40
New 50pcs 1" PEX Stainless Steel Clamp Cinch Ring Crimp Pinch Fitting Tubing
USD 11.59
10Pcs CAT40 75° 0.747" Pull Stud Coolant Thru Retention Knob For Mori Doosan
USD 29.85
New List Item
150 Pack Aluminum Rivet Nut Kit Rivnut Nutsert Standard Inch SAE Imperial
USD 17.74
Rivet Gun Kit Rivnut Thread Setting Tool Nut Setter NutSert Metric SAE Riveting
USD 39.40
150 Pcs SAE Rivet Nut Kit Rivnut Nutsert Assort Set 1/4-20 10-32 10-24 8-32 6-32
USD 14.84
M6 Metric Carbon Steel Rivet Nut Flat Head Threaded Insert Nutsert 100 Pcs
USD 10.94
Pack 300 SAE Aluminum Rivet Nut Rivnut Nutsert Kit 150pcs Metric + 150pcs
USD 23.94
10Pcs CAT40 75° 0.747" Pull Stud Coolant Thru Retention Knob For Mori Doosan
Description：
Head Diameter：0.747"
Head Angle ：
75°
Drawbar Thread Size：5/8"-11
Machine Taper Size ：CAT40
Neck Diameter：0.549"
Hole：0.281"
Pilot：0.641"
Overall Length：2.001"
Shoulder To Head：0.787"
Shoulder To End：1.024"
Coolant Hole
Features：
Made from alloy steel 5155 with heat treat to RC 56-58
Each retention knob is individually magnetic particle tested to ensure free of crack
High quality black oxide finish to ensure long enduring tool life
Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob
This pull stud is compatible with the following:
J&M JM71123
TJ Davies PSC-470 X 15
Lyndex C40-1500-ISO
Collis 69004
Command RS4E-0114-C
Quantity：
10 pcs
CAT 40
75°
.747 Pull Stud for DMG Mori Doosan
Payment
Shipping
Returns
Contact Us
We accept Paypal only.
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location. If you require another company, please contact us.
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Before leaving us neutral or negative feedback, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via eBay or PayPal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedback and low ratings doesn't get things solved.
So please talk with us and we will not let you down.
All rights reserved.