30M Long Range UHF 915Mhz ISO-18000-6C(EPC G2) WG26/34/R232/RS485 output Reader

Description

10 pcs sample cards and a license plate tag come with!!!
Introduction
the reading distance we expressed above is space test distance without any interference. If it is used for car parking, Please refer to the differences of the vehicle's  windscreen media, it is determined by the field test.
We have 5 models of Long Range reader.the form below is the parallel.
Model
DLC-6890
（This is it）
DLC-6820
DLC-6884x-12
DLC-6884x-7
DLC-8820Z
Max range(M)
30M
8M
30M
8M
100M
Reliable range(M)
12M
3M
8M
3M
10m~60m software  adjustable
Card type
C:6C protocol(single card),E:6C protocol(multi-cards)
DK-800
Size(MM)
460*460*45
250*250*60
460*460*45
250*250*60
250*250*60
Support criteries
ISO-18000-6C(EPC G2)
Antenna Gain
12dbi circular polarization
7dbi circular polarization
12dbi line polarization
7dbi line polarization
120dbi circular polarization
Antenna Power(W)
1
1
1
1
Null
Interface
RS232,RS485,Wiegand26,Wiegand34
RS232
Weigand26
High speed recognition
120KM/H
Packing Dimension(cm)
51*51*17
44*26*9
51*51*17
44*26*9
44*26*9
Net weight(KG)
5.5
2
5.5
2
2
Working method
passive
passive
passive
passive
active
For occasions
Outdoor
Outdoor
Indoor
Indoor
Outdoor
Working temperature(
c
)
-35~+65
Storage Temperature
(
c
)
-45~+95
Voltage
DC-12V
9V
Power(W)
5
5
5/channel(Maxto 4 antennas can be connected)
5/channel(Maxto 4 antennas can be connected)
3
Integrated/seperated
Antenna built-in
Antenna built-in
Antenna seperated
Antenna seperated
Antenna built-in
Features
You can modify the reading range and polarization direction by its SDK,
2.It has an external triggering signal access port in advice.For example,When a vehicle sensor sends a pulse to this triggering port,the reader will start and search the cards.
1.Interface:
Optinal RS232,RS485,Wiegand 26,Wiegand 34.you can select one of them.Addtion:RS485 has two method.A.no RS485 protocol just for increase the data transferring range.B.if you need,we can provide SDK and burn a ID address to each reader in order to link up to 128 units onto a RS485 bus.(if you do need such model,please contact me at first)
2.Working method:
a.Triggering. The reader has a triggering port.Upon triggering method,reader sents card numbers only while the triggering port gets a high level pluse.
b.Interval. The reader working constantly,transfer the card number continuously while a card appears in the reading range.you can adjust the interval of signal.
c.Master-slave method.By such a method,you can get the card number whenever send a trigger sigal by RS232.You can develop by SDK we provide.
3.Reading range:
Range can be adjusted from 10% to 100% of  max  range with a software by yourself to correspond your requirement.
Technical parameter
Operating frequency:902~928MHZ
Product dimension:460*460*45MM
Operating voltage :DC-12V
Power consumption(max):5W
Storage temp:-45~+95
c
Operating temp:-35~+65
c
Supporting agreement:ISO-18000-6C(EPC G2),ISO-18000-6B(choose one )
Antenna gain:7dbi circular polarization
Antenna power:Access antenna power 1W(adjustable)
Data interface:At the same time with RS232,RS485,Weigand26 or 34data interface
Rapid recognition:can identify fast-moving electronic labels , the speed is faster than 120km/h.
Packaging weight:5.6kg
Accessories
10pcs of standard 85*54*0.8mm card. A set of iron frame,A 100~240VAC to 2A/12VDC power supplier,a RS232 cable.
More pictures