-40%
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3
3pcs CAT40 1 x 3

3pcs CAT40 1 x 3" End Mill Tool Holder Fits Okuma W/ 3pcs Free Pull Stud

$ 41.18

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Type: End Mill Tool Holder,Pull stud
  • Brand: Unbranded
  • All returns accepted: Returns Accepted
  • MPN: Does not apply
  • Model: For Lathe Milling Tool
  • Bundle Description: 3x End Mill Tool Holder,Pull stud
  • Custom Bundle: Yes
  • Manufacturer Part Number: Does not apply
  • Item must be returned within: 30 Days
  • Condition: New

    Description

    3pcs CAT40 1 x 3" End Mill Tool Holder Fits Okuma W/ 3pcs Free Pull Stud
    Fitment:
    Fits Kira, Milltronic, Hitachi-Seiki, Mitsubishi, Okuma, Matsura, Howa Kogyo
    End Mill Tool Holder:
    Specification：
    Type:
    CAT40
    Material：40CR
    Max RPM Balanced To：G2.5 20000
    TIR (Inch)： 0.0001”
    Drawbar Thread Size 5/8“-11
    Noes Diameter： 2.38"
    Feature：
    Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
    Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole. And when the holder is placed into the Haimer balance machine, less holes would need to be drilled in the v groove of the flange to protect the rigidity of the tool holder. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
    All critical surface are precision ground
    Internal bore concentricity is less than 0.0001" from taper to end mill pocket
    Flange and V-groove are precision ground to ensure reliable tool change
    Coolant thru spindle capability
    pull stud
    Product description
    Taper:
    CAT 40
    A:
    60
    D1 Knob:
    0.589"
    D2 Neck:
    0.392"
    D3 Pilot:
    0.6360"
    L:
    2.250"
    L1:
    0.998"
    L2 Shou to End:
    1.264"
    Knob Socket:
    RKW40
    Package Include:
    3 x End Mill Tool Holder
    3 x Pull stud
    We accept payment via
    PAYPAL ONLY
    .
    1. Shipping
    From USA
    ,so we will ship as soon as possible.
    2.Our handling time is
    1-3
    days.
    3. If you still haven't received your parcel by the expected data, please contact us before leaving us bad feedback or open case against to us, we will give you a satisfied solution promptly. Thank you for your cooperation.
    Our products are 100% new, quality assurance, reasonable price, fast delivery. For us, your satisfaction is our greatest motivation, if you have any good suggestions about our products and other aspects, please do not hesitate to contact us and we will try our best to satisfied you.
    On Jun-28-21 at 08:19:12 PDT, seller added the following information: