EasySplicer is a Fusion Splicer made in Sweden, designed for daily with fiber

Description

Fusion Splicer EasySplicer is a Fusion Splicer made in Sweden, designed for working daily with fiber optic installations.
It´s small and handy to bring along. The construction is made very rugged and even if splicing should take place under good conditions (indoors) it is still designed to be used out in the field.
EasySplicer is truly a grand innovation made for building Fiber optic Networks.
It will revolutionize the way these networks are built by its ease of use and it will cut the costs for the customers which will generate more work for the installers!
Technical specification:
Splicing method: V-groove (cladding alignment)
Fiber Types: SMF,MMF 50/125 and 62.5/125 um fiber, 250 um primary and 900 um secondary coated fiber.
Fiber Handling: Fiber holders, 3 pairs (250, 900 and Loose tube)
Splice Programs: 3 pre-defined. SMF, MMF & OM1
Typical splice Loss: 0.03dB SMF, 0.01dB MMF
Typical Cycle time: 7s + 35s (splice cycle+ oven cycle)
Sleeve Dimensions: Max 64mm length, 2-7mm diameter supported by oven.
Communication: USB, mini usb plug.
Memory: External SD-Card, Max 32GB (FAT-32).
Monitor: LCD, color, 2,8″, 320×240 pixels
Magnification: Camera 140xOperating Environment: 0-45°C, max 95% RH non-condensing.
Weight: 800gPower Sources: External power supply, 6V, 1.5A, 100-240VAC 50-60Hz, Li-Ion batterySplicing
Capacity: 60 splicing cycles
Additional features: Loss estimation, Fault detection of fiber, SD-card for logging etc.