Flux Drum Pump Motor And F 458-1 And Flux Fp 424 Pump Stem

Description

Flux Drum Pump Motor And F 458-1 And Flux Fp 424 Pump Stem. Shipped with USPS First class The F 458 is a compact commutator motor, has an extremely tough housing with double skin in aluminium and is thus very quiet. The motor is completely closed, has a special corrosion-resistant painting and is therefore suitable for use in extreme conditions, even in areas with corrosive vapours.
The motor F 458 EL has additionally an easy to handle electronic speed adjustment to regulate the delivery rate.
The motor F 458-1 is identical with type F 458, but has with 700 watts a much higher performance. This motor is used when a higher capacity is required or when slightly viscous fluids or media with an increased density have to be pumped.
Technical datas:
Protection class: IP 55
Ventilation: external
Tension (Volt): 12 V, 24 V, 110 V, 120 V, 230 V, 240 V
Frequency: 50-60 Hz
Performance (watt): 460/700 W
Speed adjustment: Optional
Weight: 5,1/5,9 kg
Integral no-volt release: Optional
Benefits:
Very robust housing in aluminium
With special corrosion-resistant painting
Very low noise level
Motor is completely closed
F 458-1: 700 W
F 458 EL: with infinitely speed adjustment
The sealless F/FP 424 is ideal for transferring various low-viscosity and aggressive media. It is suitable for free-flowing liquids that are clean and non-abrasive. Best paired for use with drum, totes, IBCs, etc. (custom lengths are available upon request). The distinct FLUX advantage lies in spiral-shaped guide bearing in the inner tube which prevents a build-up of media in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride (PVDF). The F/FP 424 in stainless steel can also be used in explosion proof environments.
Application areas: Atex
Product attributes
Sealless pump design means no seal wear
Long spiral-shaped guide bearing and steel cored inner tube promote long service life
Extended bearing life due to radial shaft seals prevent corrosive vapors and liquid in the coupling area
ATEX versions for use in hazardous areas
Can be temporarily operated against a closed valve, hand nozzle, etc.
Special construction available for transferring AdBlue®DEF fluid
Can be paired with all 4 Series FLUX motors