FTTH Tool Kit Orientek T45 Fusion Splicer+SV20A SM OTDR 1310/1550nm OPM OLS VFL

Description

Orientek T45 Fusion Splicer with TR600 SV20A SM OTDR 1310/1550nm+OPM+OLS+VFL
1.Orientek T45 Fusion Splicer
Description:
4.3-inch high definition capacitive touch screen.
320 times image magnification，5mm fusion splicing for fibers of ultra-short cutting length
300 groups of fusion splicing modes，100 groups of heating modes
USB and SD card interfaces，U-disk automatic software upgrade
built-in modular lithium battery,supports 330 times of splicing and heating.
7s fast fusion splicing，18s highly efficient heating.
Precise fiber core alignment，ultra-low fiber fusion splicing consumption
10000 groups of fusion records，64 images storage
Ceramic presser foot,ceramic V-block,all-in-one fixture
Dual-direction splicing,automatic splicing,intelligent pyrocondensation
Specification
:
Alignment method
Precise core alignment and cladding alignment
Applicable fibers
Any common optical fibers.rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653,ITU-TG.655 and ITU-TG.657
Optical fiber diameter
Cladding:80~150mm，coatinglayer:0.1~3mm
Cuttling length
5-16mm (coated optical fiber diameter≤250μm);10mm(coated optical fiberdiameter：0.25~3mm)
Fusion splicing consumption (typical value)
0.02dB(SMF)；0.01dB(MMF)；0.04dB(DSF)；0.04dB(NZDSF)
Retum loss
Better than 60dB
Fusion splicing time（typical value ）
7s
Heating time(typical value)
18s
Pulling force test
1.96~2.25N
Thermal shrinkagetube
60mm，40mm and a series of thermal shrinkage tubes
Graphical display
High-performance 4.3 inch lcd
Magnification time
320 times/88 times
Fusion splicing record
10000 groups
Battery capacity
11.1V，6800mAh，typical value offusion splicing and thermal cycle is 330 times
Battery servicelife
Cycle charging times reach 300-500，can be replaced by customers
Electrode servicelife
Typical value is 4000 times，can be replaced by customers
Construction lighting
Built-in lights with high-brightness and wide lighting area
Working environment
Temp:-10~50℃；hum:0~95%RH,height above sealeve1:0~6000m
Operation interfaces
GUI graphical operation interfaces
Extemal power
AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v
Extemal port
USB/SD
Dimensions
120mm(W)×130mm(H)×154mm(D),(without rubber anti-vibration pad)
Weight
1.59kg(host engine).0.37kg(battery)
2.Orientek TR600 SV20A SM 1310/1550nm OTDR
FTTX Application:
FTTx application installation and maintenance, fiber R&D and producing testing.
1. to test the length, fiber loss connector loss and other physical characteristics of fiber.
2. to locate events on fiber cables precisely.
Feature:
Rugged design, light weight and easy operation
Applicable fiber: Networks with PLC Splitters
<3m extra-short event dead zone
Wavelength:
1310/1550nm
Up to 32/30dB High Dynamic Range
Distance Range: 4,8,16,32,64,128,256km
Pulse with: 10,30,80,160,320,640,1280,5120,1024ns
Memory capacity >800 traces
Built-in friendly-environment lithium battery with high capacity for over 8 hours of operating life
Display:640×480, 5.6 inch low-reflection TFT-LCD (touch screen)
One year Warranty
With Calibration Certificate
Support English & Spanish
Specifications:
Model
=
TR600 SV20A SM OTDR
Wavelength(nm)
=
1310/1550
Dynamic range(dB)
=
32/30
Pulse width (ns)
=
5,20,40,80,160,320,640,1280,2560,5120,10240,20480
Display
5.6 inch TFT LCD touch screen
Event blind zone (m)
=
3
Attenuation blind zone (m)
=
13
Linearity (dB/dB)
=
±0.05 dB/ dB
Loss threshold (dB)
=
0.05
Loss resolution ratio (dB)
=
0.01
Sampling resolution ratio (m)
=
0.125 to 8
Sampling point
=
32k
Distance uncertainty (m)
=
±(1 m + 5×10-5× distance + sampling interval)
Distance scope (km)
=
0.3 to180
Memory capacity of trace
=
SD Card (4G), > 10000 pieces
Duration of measurement
=
Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable
Optical interface
=
FC/UPC+SC/UPC+LC/UPC
Data interface
=
USB interface, SD card interface
Visual Fault Locator
=
Available
Power supply
=
Lithium battery; continuing working duration ≥ 8 hours
Warranty period
=
12 months
Standard Package:
Carrying Case
OTDR with Battery Pack
Calibration & Test Report
SD Card
FC & SC & LC connectors
AC Adaptor
Power Supply
User Manual & Trace Manage Software (CD)
3.Optical power meter+OLS+VFL
*T25M Optical Power Meter
①
Wavelength : 800 ~1700 nm
②
Detector : InGaAs
③
Measurement Range : -70~+3 dBm
④
Resolution : 0.01 dBm
⑤
Connector : SC+ 2.5mm universal (1.25mm for LC is Optional)
⑥
Power Supply : Alkaline Battery(3 AA 1.5V)
*
T15M-S Optical Light Source
①
Wavelength : 1310/1550nm
②
Typical Output Power : -5dBm
③
Output Stability : ±0.05dB/15mins; ±0.1dB/ 8hours
④
Modulation Frequencies : CW,270Hz,1KHz,2KHz
⑤
Connector : SC+ 2.5mm universal (1.25mm for LC is Optional)
⑥
Power Supply : Alkaline Battery(3 AA 1.5V )
*T10 Visual Fault Locator
Payment
:
·
We only accept PayPal.
·
Payment must be made within 7 calendar days of the auction end time.
·
Non-Paying bidders will be reported.
Shipping
:
·
Important: Brazil Customers please leave your CPF or CNPJ number after placing order.
·
Please verify your address when checkout from PAYPAL. We will ship item to your PAYPAL address. If other address, please advise us by EBAY or E-mail.*
1. Lead Time: stock available, usually can ship within 24 hours upon receipt of payment.
2. Delievery time :   it's depends on the shipping method,
7~15 workings days to USA/AU/UK/Asian countries by ePacket.
15~25 workings days to Western European countries by Singapore Post Air Mail.
Faster coutier(such as fedex , DHL , EMS, TNT.....) would take 5-10 working days
3. Customs Tax: Buyer is responsible for the custom duty and local import taxes.
4. Declaration to save tax: If needed, we can also help declare low value on invoice for you to pay lower tax in your country. not all suppliers can do this, and it will take about extra 3 working days to operate.
Contact
:
A
ny inquiry, please feel free send us message.
We will reply your message within 24hours.
Manufacture introduce
:
We are an ODM (original design manufacturer)/OEM (original equipment manufacturer) providing a variety of support services related to design, manufacturing, and after-sales service for Optical Fiber Communication (OFC) products.
And also provide Buyer Lable service. We sell products to clients who use their own brand to introduce into the marketplace.
Warranty
:
Warranty Period: 1 year.
In Warranty:
1. if the machine comes with any small problem: please contact us asap.
we will give you online supports: Phone Call, Email and Video Tutorial. and send you the replacement parts by express.
2. If the machine comes with big problem: we will ask you to send it back to us for repaired.
and then send back to you. We will send a new machine to you if we can not fix the broken machine.
Out of Warranty:
If the buyer need the parts, the seller promise offer it only at the basic cost.