Fujikura 30s fusion splicer-automatic core alignment splicer with cleaver

Description

Fujikura 30s fusion splicer. Condition is "Used".  Lightly used in very good condition.  Selling AS IS
Features
Fully automatic operation once fibers are set in the fixture
Observation of both X and Y axis simultaneously
Atmosphere, humidity and temperature compensation functions provided
Mechanical proof test provided
Automatically stores the last 100 splice losses together with dates.  Optional built-in memory card slot for storing additional splices.
Mode field diameter mismatch compensation splicing programs.  Suitable for splicing two different fibers (such as DS fiber to Er-doped fiber).
Splice loss control function for creating an in-line fixed attenuator
Arc power is optimized automatically by an integrated arc power test
Programmable tube heating cycle
Dust detection function
Fiber Splicing Capabilities
Single Fiber: SM @ 1310 nm, DS @ 1550 nm, CS @ 1550 nm, MM, Erbium Doped fiber
Splice Loss
Typical 0.02dB with SM fiber, 0.01dB with MM, and 0.05dB with dispersion shifted
Return Loss
60dB
Cleaved Fiber End Angle Alarm
Programmable up to 5º
Viewing Method
CCD Camera with high resolution 4" LCD monitor with excellent viewability in direct sunlight
Memory
100-splice data sets with internal memory. (Increased to 1600 data sets with optional 64 KB PCMCIA memory card and 24,000 splice data sets with 1MB memory card
Power Supply
85 to265 VAC (50/60 Hz) and 10 to 15 VDC
Dimensions (W X D X H):
21cm x 18.7cm x 17cm (8.3" x 7.4" x 6.7")