Fujikura Fusion Splicer 12S

Description

* worlds smallest, lightest, most portable fusion splicer available (4.76”w x 6.38”d x 2.24”h)
* Compatible with FuseConnect line of Fusion Installable connectors
* 2 Camera observation system provides accurate fiber alignment & loss estimation calculations
* Large 4.5” Monitor with Crystal Clear Image
* Long-life battery powers up to 100 splice cycles including application of splice protection sleeve
* Fully rugged chassis provides shock, dust & moisture protection
* Full featured unit offers unmatched versatility
* Innovative transit case converts to easy to use workstation
* Very low ARC count
*Software updates via Internet
* backed by best service team in industry
Applications: FTTX, remote locations
Specifications:
Single mode (G.652 & G.657), multimode (G.651),
DSF (G.653), NZDS ( G.655)
Cladding diameter, 125 umcoating dimeter 250 um or 900 umfiber, cleave length 5mm to 13 mm, typical average splice loss 0.05 dB(SM), 0.02 dB (MM), 0.08 dB (DS) & 0.08 dB ( NZDS), splice time typical 15 sec with SM, ARC calibration method automatic, real-time and by using results of previous splice when in AUTO-mode, manual ARC calibration function available, 100 splice modes, results last 2,000 splices, 4.5” fiber display TFT color LCD with X or Y view or both X and Y view simultaneously, magnification 100x for X & Y view, method 2 axis CMOS camera - crystal clear even in bright sunlight,
Altitude: 0 to 3,660 m above sea level, 10 degrees to 50 degrees C, humidity: 0-95% RH, non-dew mechanical
Proof test 1.96 NTube heater, 30 heating modes, tube heating time typical 30 sec with FP-03 (60mm)
Sleeve protection sleeve length (60mm,40mm)
Microsplice/heat cycles with battery typical 100 cycles with BTR-10 electrode life, 3,000 splice power supply,
Auto select from 100v to 240v with ac adapter,
14.8 dc with installed battery terminals USB 2.0
Wind protection- max wind velocity of 15 m/s (34 mph)
Dimensions: 121x162x57mm/4.76x6.38x2.24 inches
Weight: .776kg (1.71 lbs) with battery