Orientek T45 Fusion Splicer + K330 SM OTDR 1310/1550nm OPM OLS VFL Mini OTDR

Description

Orientek T45 Fusion Splicer with K330 OTDR SM 1310/1550nm
Description
1. Fusion Splicer Specification
Machine language:  English. French. Portuguese. Spanish
Alignment method
Precise core alignment and cladding alignment
Applicable fibers
Any common optical fibers.rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653,ITU-TG.655 and ITU-TG.657
Optical fiber diameter
Cladding:80~150mm,coatinglayer:0.1~3mm
Cuttling length
5-16mm (coated optical fiber diameter≤250μm);10mm(coated optical fiberdiameter:0.25~3mm)
Fusion splicing consumption (typical value)
0.02dB(SMF);0.01dB(MMF);0.04dB(DSF);0.04dB(NZDSF)
Retum loss
Better than 60dB
Fusion splicing time(typical value )
7s
Heating time(typical value)
18s
Pulling force test
1.96~2.25N
Thermal shrinkagetube
60mm,40mm and a series of thermal shrinkage tubes
Graphical display
High-performance 4.3 inch lcd
Magnification time
320 times/88 times
Fusion splicing record
10000 groups
Battery capacity
11.1V,6800mAh,typical value offusion splicing and thermal cycle is 330 times
Battery servicelife
Cycle charging times reach 300-500,can be replaced by customers
Electrode servicelife
Typical value is 4000 times,can be replaced by customers
Construction lighting
Built-in lights with high-brightness and wide lighting area
Working environment
Temp:-10~50
℃
;hum:0~95%RH,height above sealeve1:0~6000m
Operation interfaces
GUI graphical operation interfaces
Extemal power
AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v
Extemal port
USB/SD
Dimensions
120mm(W)×130mm(H)×154mm(D),(without rubber anti-vibration pad)
Weight
1.59kg(host engine).0.37kg(battery)
2: K330 OTDR Specification
15 Hours Battery Operation
Imagine working an entire work shift at your remote work site without worrying a . bout running out of battery power.
The K330’s
powerful Li-Ion battery 4200mah will last for an amazing 18 hours under the Telcordia standard conditions
and 10 hours even with the
laser continuously turned on!
Visible Light Source
Visible, continuous/modulated red light
laser.
Invaluable test instrument for checking continuity of  patchcords, launch fibers, or short
fiber trunks. Breaks and bendings in fiber can be identified visually as
the
visible light exits the fiber on such fault
events.
*Available in K330 only.
PARAMETER
K330
Central wave length
1310nm/1550nm ± 20nm
Type of compatible applicable fibres
single-mode
Dynamic range
32/30dB(100-110km)
Min. event deadzone
1.6m(single-mode)
Ranging accuracy
±(1m+sampling interval+0.003%×distance)(excluding refractive index imbedding error)
Resolution of ranging
0.1m-16m
Loss threshold value
0.01dB
Linearity
0.05dB/dB
VFL output power
10mW (only integrated in K330)
Measurement range
0.3, 1, 3, 5, 10, 30, 60, 120km (single-mode)
Pulse width
5, 10, 20, 40, 80, 160, 320, 640, 1280, 2560, 10240ns
Number of sampling points
65K
Waveform storage capacity
1000 frames
Range of refractive index
1.00000
∼
2.00000
Range of optical-cable correction factor
0.80000~1.0000
LCD display
3.5” color LCD
Port
USB
Optical output port
FC/UPC (SC/UPC、LC/UPC optional)
Power supply
AC/DC adapter:
AC input: 100V
∼
240V(1.5A)
Output DC: 9V(2A)
Power frequency: 50Hz
∼
60Hz
Internal lithium battery: 7.4V, 4200mAh
Working hours of battery: 15 hours (normal temperature)
Menu language
English/Spanish/Portuguese
Environmental requirements
Storage
temperature:
－
40
℃∼
70
℃
(exclusive
of
battery)
Relative humidity: 5%
－
95%, no
condensation
Dimensions
250mm×130mm×66mm
Weight
About 1kg
3: Mini Optical Power Meter + Mini Light Source
T25M Optical Power Meter
① Wavelength : 800 ~1700 nm
② Detector : InGaAs
③ Measurement Range : -70~+3 dBm
④ Resolution : 0.01 dBm
⑤ Connector : FC+SC+ 2.5mm universal (1.25mm for LC is Optional)
⑥ Power Supply : Alkaline Battery(3 AA 1.5V)
T15M-S Optical Light Source
①  Wavelength : 1310/1550nm
② Typical Output Power : -5dBm
③ Output Stability : ±0.05dB/15mins; ±0.1dB/ 8hours
④ Modulation Frequencies : CW,270Hz,1KHz,2KHz
⑤ Connector : FC+SC+ 2.5mm universal (1.25mm for LC is Optional)
⑥ Power Supply : Alkaline Battery(3 AA 1.5V )
4. Visual Fault Locator:
- Pocket size Visual Fault Locator 1mw 10km
Payment
We only accept PayPal.
Payment must be made within 7 calendar days of the auction end time.
Shipping
Please verify your address.
If other address, please advise us
by
EBAY message.*
1.
Lead Time:
stock available, usually can ship within 24 hours upon receipt of payment.
2.
Delievery time :
Faster coutier(such as fedex , DHL , EMS, TNT.....) would take 5-10 working days
Contact
Any inquiry, please feel free send us message.
We will reply your messag as soon as possible
Manufacture Introduce
We are an ODM (original design manufacturer)/OEM (original equipment manufacturer) providing a variety of support services related to design, manufacturing, and after-sales service for Optical Fiber Communication (OFC) products.
And also provide
Buyer Lable service
. We sell products to clients who use their own brand to introduce into the marketplace
Warranty
Warranty Period:
1 year.
In Warranty:
1. if the machine comes with any small problem: please contact us asap.
we will give you online supports: Phone Call, Email and Video Tutorial. and send you the replacement parts by express
.
2. If the machine comes with big problem: we will ask you to send it back to us for repaired.
and then send back to you. We will send a new machine to you if we can not fix the broken machine.
Out of Warranty:
If the buyer need the parts, the seller promise offer it only at the basic cost