-40%
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm
SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm

SDL Fiber Laser FL10 JDS Uniphase ~ 10 Watts - Laser Emission WORKING - ~1100 nm

$ 369.07

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Custom Bundle: No
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • MPN: FL10-3911
  • Condition: Laser emission in excellent condition and enclosure good condition with some surface wear including nicks and scratches especially on top of unit. The laser was tested and all operations appear to work and laser emission works at set power levels. This unit does NOT include control remote and can be operated via command using terminal emulation software. Once set to turn on, one command can be used to set power levels and turn the laser emission on and off.
  • Return shipping will be paid by: Buyer
  • Model: FL10
  • All returns accepted: Returns Accepted
  • Brand: SDL JDS Uniphase (JDSU)
  • Country/Region of Manufacture: United States
  • Intended Use/Discipline: Laser Laboratory
  • Modified Item: No

    Description

    Check out my
    other items
    SDL - JDS Uniphase (JDSU)
    9-10 Watt, 1100 nm IR
    Single Transverse Mode
    SW Continuous Wave Fiber Laser
    Model SDL-FL10-3911
    PDF Manual Included
    Note1: Remote not include but laser operated via commands using terminal emulation software via RS232 communication with computer
    Note:2 Fiber on back of unit
    JDSU SDL FL10 cw Fiber Laser Laser System Specification
    Model: FL10-3911
    Key features
    •Diffraction-limited light delivered through fiber termination module
    •Single transverse mode, collimated beam
    •Light focusable to <10 µm spot
    •OEM subsystem
    •Compact, air-cooled
    •1 µm wavelength
    Applications
    •Marking
    •Precision cutting and welding
    •High resolution soldering
    •Micro-adjustment
    •Thin film etching
    •Drilling and trimming
    •Thermal platesetting/proofing
    Optical Specifications
    Power Output: 9.0 W cw
    Power Monitor Calibration: ± 8% full scale
    Auto-Power Shut-Off: >10% over rated power
    Control Modes: Current or Power selectable
    Peak Wavelength Range: 1110 ± 5 nm
    Bandwidth: 2 nm (FWHM) typical
    Collimated Output Beam
    Beam Diameter: 7.7 mm ± 0.8 mm(nominal, 1/e2, full width)
    Beam Divergence: ≤0.2 mrad(nominal, 1/e, half angle)
    Beam Centration: ≤500 µm (w.r.t. central axis)
    Beam Pointing: ≤10 mrad
    Beam Circularity: ≤1.1 ≤1.1
    Electrical Specifications
    Input Power: 90-130 or 180-250 VAC, 48-66Hz
    Risetime: <500 µsec. Pulsed mode emission available through TTL pulsed input
    Control: RS232 Interface or remote (Not Included)
    Mechanical Specifications
    Beam Attenuator: Electrically operated for safety purposes
    Cooling Air Flow: Internal fan. At least 3” (80 mm) clearance, both sides
    Weight: <22 lbs.