Waterproof Keypad Anti-passback EM ID Proximity Card Standalone Access Control

Description

CC Series is a standalone for two doors, support card, pin, card+pin access way. It is with 2 relays to control
2 doors and supports up to 2000
users in total,each user can possess one card and one pin.
It can directly drive Lock,Alarm,Ring Bell,and also can connect with Exit Button and Door Contact.
There are 7 working mode with this device.1.Wiegand Reader, 2.Standalone for single door, 3.standalone
for two doors,4.with external reader
for two doors 5.two units interlocked for two doors,6.Anti-passback for
single door,7.Anti-passback for two door.
Besides, it also supports 1 Master code,2 Manager card, 2 Anti-duress Card users and 2 Anti-duress PIN
users, providing users with easy
operations and safety reliability.
Features
1.Pure Zinc alloy case;waterproof conform to IP 68
2.Built-in 125KHz OR 13.56MHz card reader (CC1)
3.Perfect digital backlit key,the back light can be set to Normal ON,Normal OFF or Human-Approach ON
4.With anti-tamper Alarm,door contact Alarm,Anti-duress Alarm function
5.Add and delete card user quickly With Manager cards
6.Can register and delete user via keypad
7.Master can open the door when entering the setting status
8. Multi working modes: reader,one door,two door, interlock,anti-passback and so on, suitable for many occasions
Specification
Input Voltage AC/DC 12V
Idle Current<25mA
Lock output load<1A
Alarm output load<1A
Ring bell load<1A
Card reading distance 40mm Max
Card Frequency: 125KHz for EM and HID
Card transmission format 26-37 bit wiegand
Keypad transmission format:4bit,8bit and Virtual card number
Operating Temperature:-45°C～55° C
Operating Humidity:0%～95%
Size: CC1: 145*58*22cm; CC2：120*80*22cm
Multi working mode:
There are 7 working mode with this device.
1.Wiegand Reader
2.Standalone for single door
3.standalone for two doors
4.with external reader for two doors
5.two units interlocked for two doors
6.Anti-passback for single door
7.Anti-passback for two door
The factory default is Standalone for single door (we can change the default model according to customer order). User can modify
the working mode, when the device reset to factory default,the setting is still valid.
Wiegand Reader mode
controller, it has following function.
Modify master pin
Set facility code
Set the card transmission format
Set the keypad transmission format
Set optional setting
Anti-Tamper alarm
For more details, please contact us.